Home Machine Elements Lifting accessories GN 581

GN 581

Lifting Eye Bolts (Rotating)

Steel

Enquire Now

Description

Specification

Types

Type A: Without key

Type B: With key

Ring

Steel, German Material No. 1.6541

Forged

High-tensile tempered

100 % electro magnetic tensile tested to EN 1677

Powder coated, pink

Bolt

Steel

Property class 10.9

100 % electro magnetic tensile tested

Information

The lifting eye bolts GN 581 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580 ).

Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).

The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.

Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.

The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.

The hexagon socket bolt cannot be removed from the ring.

Type B is suitable for assembly without the need to use tools: inserting the spanner in the hex socket of the bolt allows the bolt to be turned in and out by hand.

Operating instruction GN 581

Strength values of screws

Load Capacity

Method of mounting
Number	1	1	2	2	2	2	2	3 and 4	3 and 4	3 and 4
Angles of inclination	0°	90°	0°	90°	0° to 45 °	45° to 60°	asymm.	0° to 45°	45° to 60°	asymm.
Factor	-	1	-	2	1.4	1	1	2.1	1.5	1
M 6	0.50	0.10 t	1.00	0.20 t	0.14	0.10 t	0.10 t	0.21 t	0.15 t	0.10 t
M 8	1.00 [0.14]	0.30 t	2.00 [0.28]	0.60 t	0.42 [0.10]	0.30 t	0.30 t	0.63 t	0.45 t	0.30 t
M 10	1.00 t [0.23]	0.40 t	2.00 [0.46]	0.80 t	0.56 [0.17]	0.40 t	0.40 t	0.84 t	0.60 t	0.40 t
M 12	2.00 [0.34]	0.75 t	4.00 [0.68]	1.50 t	1.00 [0.24]	0.75 t	0.75 t	1.57 t	1.12 t	0.75 t
M 16	4.00 [0.70]	1.50 t	8.00 [1.40]	3.00 t	2.12 [0.50]	1.50 t	1.50 t	3.15 t	2.24 t	1.50 t
M 20	6.00 [1.20]	2.30 t	12.00 [2.40]	4.60 t	3.22 [0.86]	2.30 t	2.30 t	4.83 t	3.45 t	2.30 t
M 24	8.00 [1.80]	3.20 t	16.00 [3.60]	6.40 t	4.5 [1.29]	3.20 t	3.20 t	6.70 t	4.80 t	3.20 t
M 30	12.00 [3.20]	4.50 t	24.00 [6.40]	9.00 t	6.30 [2.30]	4.50 t	4.50 t	9.50 t	6.75 t	4.50 t
M 36	16.0 [4.60]	7.00 t	32.00 [9.20]	14.00 t	9.80 [3.30]	7.00 t	7.00 t	14.70 t	10.50 t	7.00 t

Safety instructions

The loads given in brackets refer to the load capacity of the corresponding lifting eye bolt DIN 580. If such a value is not indicated the use of the lifting eye bolts DIN 580 is not permitted!

The bolt-on surface for the lifting eye bolts GN 581 must be plane and at a right angle to the threaded borehole; the countersinking must be ≤ the nominal diameter of the thread.

Screwed in, the collar of the screw must make firm contact (do not use washers) and the eye bolt must rotate freely by 360°.

Before applying the load, turn the lifting eye bolt in the direction of the force. The lifting eye bolt is not suitable for frequent rotation cycles under load.

The specified load values apply for a minimum screw-in length of 1.5 × nominal thread diameter in steel with a minimum tensile strength of 37 kp/mm², at an ambient temperature of – 40° C to + 100° C. Load-bearing capacity under different conditions upon request.

The operating instruction contains further guidelines and is included with every lifting eye bolt (see also www.elesa-ganter.com).

GN 581

	Color	d₁	d₂	d₃	d₄	d₅	h	k₁	k₂	Nominal load (WLL)
Code												Actions
GN 581-M6-A	A	M 6	13	23	28	20	37	7	37	0.10 t [1.0 kN]	100
GN 581-M6-B	B	M 6	13	23	28	20	37	7	37	0.10 t [1.0 kN]	100
GN 581-M8-A	A	M 8	16.3	25	30	25	46	9	47	0.30 t [3.0 kN]	120
GN 581-M8-B	B	M 8	16.3	25	30	25	46	9	47	0.30 t [3.0 kN]	120
GN 581-M10-A	A	M 10	16.3	25	30	25	46	9	47	0.40 t [4.0 kN]	120
GN 581-M10-B	B	M 10	16.3	25	30	25	46	9	47	0.40 t [4.0 kN]	120
GN 581-M12-A	A	M 12	19.8	30	34	30	55	10	56	0.75 t [7.5 kN]	180
GN 581-M12-B	B	M 12	19.8	30	34	30	55	10	56	0.75 t [7.5 kN]	180
GN 581-M16-A	A	M 16	23.5	36	40	35	64	13	65	1.50 t [15.0 kN]	320
GN 581-M16-B	B	M 16	23.5	36	40	35	64	13	65	1.50 t [15.0 kN]	320
GN 581-M20-A	A	M 20	29.3	41	50	40	75	16	76	2.30 t [23.0 kN]	490
GN 581-M20-B	B	M 20	29.3	41	50	40	75	16	76	2.30 t [23.0 kN]	490
GN 581-M24-A	A	M 24	35	51	60	49	90	19	92	3.20 t [32.0 kN]	900
GN 581-M24-B	B	M 24	35	51	60	49	90	19	92	3.20 t [32.0 kN]	900
GN 581-M30-A	A	M 30	44	66	75	60	113	24	114	4.50 t [45.0 kN]	1650
GN 581-M30-B	B	M 30	44	66	75	60	113	24	114	4.50 t [45.0 kN]	1650
GN 581-M36-A	A	M 36	53	76	98	73	135	29	135	7.00 t [70.0 kN]	3100
GN 581-M36-B	B	M 36	53	76	98	73	135	29	135	7.00 t [70.0 kN]	3100

Enquiry Now

To allow us to respond to your enquiry promptly, please provide all required information.