Home Rotary Controls Direct drive indicators MPI-15

MPI-15

Magnetic measuring system

Length and angle modes

Enquire Now

Description

General information

Features and applications

MPI-15 measuring system, made of a LCD multifunction display with built-in magnetic position sensor, combined with the magnetic band M-BAND-10 (to be ordered separately), is a complete system for the measurement of linear and angular displacement (with a minimum radius of 65 mm).

Characterised by an extremely easy assembly, it allows precise alignment and positioning, reducing time and machining procedures to the minimum.

Multifunction LCD with 5 function keys.
Absolute/ incremental mode.
Programmable offset function.
External battery power supply 1.5 VDC.
Buffered memory during battery substitution.
Accidental polarity inversion protection.
Magnetic sensor envelope material: anodized aluminium.

For further information read the operating instructions.

Technical data
Battery life	1.5 years (C-type battery)
Resolution⁽¹⁾	0.1 mm - 0.01 in - 0.01°
Precision⁽²⁾	0.1 mm
Repeat accuracy⁽³⁾	0.001 mm
Operating speed	max. 5 m/s
Self-diagnostic	battery check, sensor check, magnetic tape check
Programmable measuring unit	millimetres, inches, degrees (angles)
Working temperature	0 ÷ 50 °C
Storing temperature	-20 ÷ +70 °C
Relative humidity	Max. 95% at 25°C without condensation
Protection class	IP40 whole device IP54 front side according to IEC 529 IP67 magnetic sensor
Interference protection	IEC 61000-4-2

(1) Resolution: the smallest change in length that the system is capable of displaying.

(2) Precision: the maximum deviation of the value measured by the system from the actual one.

(3) Repeat accuracy: the degree of closeness between a series of measures of the same sample, when the single measurements are carried out leaving the asurement conditions unchanged.

Accessories on request

Magnetic band M-BAND-10.

Special executions on request

The special plate display may be supplied with customised graphic symbols, marks or writings.

Magnetic sensor with cable length different from the standard executions shown in the table, up to 20 m maximum.

Instructions of use

Assembly instructions

Make a drilling of 42 +0.2/+0.5 mm x 90 +0.2/+0.5 mm in the metal sheet for the installation of the display.
Fix the display to the panel by using the specific mounting bracket (the screw is included in the supply).
Make a drilling of diameter 34 +0.2/+0.5 mm in the metal sheet for the installation of the battery case.
Fix the battery case to the panel by using the specific nut.
Fix the magnetic sensor by using M3 screws (not included in the supply). Distance between sensor and magnetic band to ensure a correct reading of the displacement: max 2.5 mm.

		Cable length [mm]
Code	Description			Actions
CE.99901-02	MPI-15-02	200	370
CE.99901-03	MPI-15-03	300	229
CE.99901-04	MPI-15-04	400	230
CE.99901-05	MPI-15-05	500	375
CE.99901-06	MPI-15-06	600	233
CE.99901-07	MPI-15-07	700	235
CE.99901-08	MPI-15-08	800	236
CE.99901-09	MPI-15-09	900	238
CE.99901-10	MPI-15-10	1000	396
CE.99901-11	MPI-15-11	1100	241
CE.99901-12	MPI-15-12	1200	242
CE.99901-13	MPI-15-13	1300	244
CE.99901-14	MPI-15-14	1400	400
CE.99901-15	MPI-15-15	1500	388
CE.99901-16	MPI-15-16	1600	248
CE.99901-17	MPI-15-17	1700	250
CE.99901-18	MPI-15-18	1800	251
CE.99901-19	MPI-15-19	1900	252
CE.99901-20	MPI-15-20	2000	401

Enquiry Now

To allow us to respond to your enquiry promptly, please provide all required information.