Your quote is currently empty!
M-BAND-10
Magnetic band
Length and angle modes
Description
General information
Features and applications
The magnetic band M-BAND-10 is made of two separate parts: the magnetic band and the cover strip. The magnetic band is made of a magnetic tape, a carrier strip and an adhesive tape (Fig.2). The cover strip is made of a protection strip and an adhesive tape (Fig.1).

Special executions on request
Special executions on request
Magnetic band with length different from the standard executions shown in the table, up to 25 m maximum.
Instructions of use
Assembly instructions
- The cover strip must be installed over the magnetic band to protect it against possible mechanical damages.
- Clean the mounting surface carefully.
- Remove the protective foil from the adhesive tape of the magnetic band.
- Stick the magnetic band on the mounting surface.
- Clean the mounting surface carefully.
- Remove the protective foil from the adhesive tape of the magnetic band.
- Stick the cover strip on the magnetic band.
- In the absence of a seat for the housing of M-BAND-10, secure the ends of the cover strip to prevent unintentional peeling.
Technical data | |
---|---|
Precision | ± 40 μm |
Material | magnetic tape: nitrilic rubber |
carrier strip: stainless steel | |
cover strip: stainless steel | |
acrylic adhesive tape | |
Length | magnetic band: 10 mm ± 0.20 mm |
cover strip: 10 mm ± 0.20 mm | |
Thickness | magnetic band: 1.43 ± 0.15 mm |
cover strip: 0.23 mm | |
Magnetic pole pitch | 5 mm |
Operating and storage temperature | -40 ÷ +100 °C |
Linear thermic expansion factor | 17 x 10-6/K |

Enquiry Now
To allow us to respond to your enquiry promptly, please provide all required information.
Related Products