Home Indexing and Positioning Elements Lock pins GN 113.3

GN 113.3

Stainless Steel-Ball lock pins

AISI 303, with hollow for grip

Enquire Now

Description

Specification

Stainless Steel AISI 303

Balls

Stainless Steel AISI 420C

Spring

Stainless Steel AISI 631

temperature resistant up to 250 °C

Information

Stainless Steel-Ball lock pins GN 113.3 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is locating pins which have often to be removed and installed again.

By pressing the spring loaded push button both balls are unlocked and by releasing it the balls are locked again.

Ball lock pins GN 113.3 are renowned for their compactness. The eye ring is enclosed unmounted.

The load values given in the above table at shear stress are theoretically obtained and indicative only. They are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

Accessory

Ball chains GN 111

Stainless Steel-Ball chains GN 111.5

Retaining cables GN 111.2

Spiral retaining cables GN 111.4

Technical information

List of Lock Pin Types
Load Capacity
ISO-Fundamental Tolerances
Stainless Steel characteristics

Load Capacity of Ball Lock Pins / Locking Pins

Information

The load capacities specified in the table for the double sided shearing resistance (breaking strength) have been calculated or theoretically defined on the basis of DIN 50141.

At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage.

The details given on load rating are non-binding guide values without any liability. In general, they do not constitute a warranty of condition.

The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values.

An appropriate safety factor must be taken into account in the design.

Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength)

GN 113.3

	d₁ -0.04/-0.08	d₁	l₁	l₁ +0.6	d₂	d₃	l₂	l₂ ±1	l₃+0.2	Location bore H11	Axial holding force in N≈	Load F in kN ≈ Load capacity in kN ≈ Double sided shearing resistance according DIN 50141 (breaking strength)
Code														Actions
GN 113.3-5-10	5	5	10	10	5.5	10	6	6	22	5	14	14	12
GN 113.3-5-15	5	5	15	15	5.5	10	6	6	22	5	14	14	12
GN 113.3-5-20	5	5	20	20	5.5	10	6	6	22	5	14	14	12
GN 113.3-5-25	5	5	25	25	5.5	10	6	6	22	5	14	14	14
GN 113.3-5-30	5	5	30	30	5.5	10	6	6	22	5	14	14	14
GN 113.3-5-35	5	5	35	35	5.5	10	6	6	22	5	14	14	14
GN 113.3-5-40	5	5	40	40	5.5	10	6	6	22	5	14	14	16
GN 113.3-5-45	5	5	45	45	5.5	10	6	6	22	5	14	14	16
GN 113.3-5-50	5	5	50	50	5.5	10	6	6	22	5	14	14	16
GN 113.3-5-60	5	5	60	60	5.5	10	6	6	22	5	14	14	18
GN 113.3-5-70	5	5	70	70	5.5	10	6	6	22	5	14	14	20
GN 113.3-5-80	5	5	80	80	5.5	10	6	6	22	5	14	14	20
GN 113.3-6-10	6	6	10	10	7	10	7	7	22	6	21	21	12
GN 113.3-6-15	6	6	15	15	7	10	7	7	22	6	21	21	14
GN 113.3-6-20	6	6	20	20	7	10	7	7	22	6	21	21	14
GN 113.3-6-25	6	6	25	25	7	10	7	7	22	6	21	21	14
GN 113.3-6-30	6	6	30	30	7	10	7	7	22	6	21	21	16
GN 113.3-6-35	6	6	35	35	7	10	7	7	22	6	21	21	18
GN 113.3-6-40	6	6	40	40	7	10	7	7	22	6	21	21	18
GN 113.3-6-45	6	6	45	45	7	10	7	7	22	6	21	21	20
GN 113.3-6-50	6	6	50	50	7	10	7	7	22	6	21	21	20
GN 113.3-6-60	6	6	60	60	7	10	7	7	22	6	21	21	22
GN 113.3-6-70	6	6	70	70	7	10	7	7	22	6	21	21	24
GN 113.3-6-80	6	6	80	80	7	10	7	7	22	6	21	21	26
GN 113.3-8-10	8	8	10	10	9.5	14	8.2	8.2	27	8	38	38	30
GN 113.3-8-15	8	8	15	15	9.5	14	8.2	8.2	27	8	38	38	32
GN 113.3-8-20	8	8	20	20	9.5	14	8.2	8.2	27	8	38	38	34
GN 113.3-8-25	8	8	25	25	9.5	14	8.2	8.2	27	8	38	38	35
GN 113.3-8-30	8	8	30	30	9.5	14	8.2	8.2	27	8	38	38	38
GN 113.3-8-35	8	8	35	35	9.5	14	8.2	8.2	27	8	38	38	40
GN 113.3-8-40	8	8	40	40	9.5	14	8.2	8.2	27	8	38	38	41
GN 113.3-8-45	8	8	45	45	9.5	14	8.2	8.2	27	8	38	38	43
GN 113.3-8-50	8	8	50	50	9.5	14	8.2	8.2	27	8	38	38	45
GN 113.3-8-60	8	8	60	60	9.5	14	8.2	8.2	27	8	38	38	48
GN 113.3-8-70	8	8	70	70	9.5	14	8.2	8.2	27	8	38	38	52
GN 113.3-8-80	8	8	80	80	9.5	14	8.2	8.2	27	8	38	38	56
GN 113.3-8-90	8	8	90	90	9.5	14	8.2	8.2	27	8	38	38	59
GN 113.3-8-100	8	8	100	100	9.5	14	8.2	8.2	27	8	38	38	63
GN 113.3-10-15	10	10	15	15	12	14	9.6	9.6	27	10	60	60	37
GN 113.3-10-20	10	10	20	20	12	14	9.6	9.6	27	10	60	60	41
GN 113.3-10-25	10	10	25	25	12	14	9.6	9.6	27	10	60	60	43
GN 113.3-10-30	10	10	30	30	12	14	9.6	9.6	27	10	60	60	47
GN 113.3-10-35	10	10	35	35	12	14	9.6	9.6	27	10	60	60	49
GN 113.3-10-40	10	10	40	40	12	14	9.6	9.6	27	10	60	60	52
GN 113.3-10-45	10	10	45	45	12	14	9.6	9.6	27	10	60	60	55
GN 113.3-10-50	10	10	50	50	12	14	9.6	9.6	27	10	60	60	58
GN 113.3-10-60	10	10	60	60	12	14	9.6	9.6	27	10	60	60	64
GN 113.3-10-70	10	10	70	70	12	14	9.6	9.6	27	10	60	60	69
GN 113.3-10-80	10	10	80	80	12	14	9.6	9.6	27	10	60	60	75
GN 113.3-10-90	10	10	90	90	12	14	9.6	9.6	27	10	60	60	81
GN 113.3-10-100	10	10	100	100	12	14	9.6	9.6	27	10	60	60	87
GN 113.3-10-110	10	10	110	110	12	14	9.6	9.6	27	10	60	60	93
GN 113.3-10-120	10	10	120	120	12	14	9.6	9.6	27	10	60	60	99
GN 113.3-12-20	12	12	20	20	14.5	20	10.6	10.6	32	12	87	87	80
GN 113.3-12-25	12	12	25	25	14.5	20	10.6	10.6	32	12	87	87	85
GN 113.3-12-30	12	12	30	30	14.5	20	10.6	10.6	32	12	87	87	89
GN 113.3-12-35	12	12	35	35	14.5	20	10.6	10.6	32	12	87	87	94
GN 113.3-12-40	12	12	40	40	14.5	20	10.6	10.6	32	12	87	87	98
GN 113.3-12-45	12	12	45	45	14.5	20	10.6	10.6	32	12	87	87	102
GN 113.3-12-50	12	12	50	50	14.5	20	10.6	10.6	32	12	87	87	106
GN 113.3-12-60	12	12	60	60	14.5	20	10.6	10.6	32	12	87	87	115
GN 113.3-12-70	12	12	70	70	14.5	20	10.6	10.6	32	12	87	87	123
GN 113.3-12-80	12	12	80	80	14.5	20	10.6	10.6	32	12	87	87	132
GN 113.3-12-90	12	12	90	90	14.5	20	10.6	10.6	32	12	87	87	140
GN 113.3-12-100	12	12	100	100	14.5	20	10.6	10.6	32	12	87	87	148
GN 113.3-12-110	12	12	110	110	14.5	20	10.6	10.6	32	12	87	87	157
GN 113.3-12-120	12	12	120	120	14.5	20	10.6	10.6	32	12	87	87	166
GN 113.3-16-30	16	16	30	30	19	20	14	14	32	16	155	155	121
GN 113.3-16-35	16	16	35	35	19	20	14	14	32	16	155	155	129
GN 113.3-16-40	16	16	40	40	19	20	14	14	32	16	155	155	137
GN 113.3-16-45	16	16	45	45	19	20	14	14	32	16	155	155	144
GN 113.3-16-50	16	16	50	50	19	20	14	14	32	16	155	155	157
GN 113.3-16-60	16	16	60	60	19	20	14	14	32	16	155	155	167
GN 113.3-16-70	16	16	70	70	19	20	14	14	32	16	155	155	183
GN 113.3-16-80	16	16	80	80	19	20	14	14	32	16	155	155	197
GN 113.3-16-90	16	16	90	90	19	20	14	14	32	16	155	155	217
GN 113.3-16-100	16	16	100	100	19	20	14	14	32	16	155	155	233
GN 113.3-16-110	16	16	110	110	19	20	14	14	32	16	155	155	249
GN 113.3-16-120	16	16	120	120	19	20	14	14	32	16	155	155	264
GN 113.3-16-130	16	16	130	130	19	20	14	14	32	16	155	155	280
GN 113.3-16-140	16	16	140	140	19	20	14	14	32	16	155	155	296
GN 113.3-16-150	16	16	150	150	19	20	14	14	32	16	155	155	311
GN 113.3-20-50	20	20	50	50	25	28	20.5	20.5	39	20	244	244	304
GN 113.3-20-60	20	20	60	60	25	28	20.5	20.5	39	20	244	244	322
GN 113.3-20-70	20	20	70	70	25	28	20.5	20.5	39	20	244	244	352
GN 113.3-20-80	20	20	80	80	25	28	20.5	20.5	39	20	244	244	371
GN 113.3-20-90	20	20	90	90	25	28	20.5	20.5	39	20	244	244	401
GN 113.3-20-100	20	20	100	100	25	28	20.5	20.5	39	20	244	244	419
GN 113.3-20-110	20	20	110	110	25	28	20.5	20.5	39	20	244	244	449
GN 113.3-20-120	20	20	120	120	25	28	20.5	20.5	39	20	244	244	449
GN 113.3-20-130	20	20	130	130	25	28	20.5	20.5	39	20	244	244	498
GN 113.3-20-140	20	20	140	140	25	28	20.5	20.5	39	20	244	244	521
GN 113.3-20-150	20	20	150	150	25	28	20.5	20.5	39	20	244	244	546
GN 113.3-25-50	25	25	50	50	30.8	28	22	22	39	25	386	386	402
GN 113.3-25-60	25	25	60	60	30.8	28	22	22	39	25	386	386	440
GN 113.3-25-70	25	25	70	70	30.8	28	22	22	39	25	386	386	478
GN 113.3-25-80	25	25	80	80	30.8	28	22	22	39	25	386	386	514
GN 113.3-25-90	25	25	90	90	30.8	28	22	22	39	25	386	386	555
GN 113.3-25-100	25	25	100	100	30.8	28	22	22	39	25	386	386	592
GN 113.3-25-110	25	25	110	110	30.8	28	22	22	39	25	386	386	631
GN 113.3-25-120	25	25	120	120	30.8	28	22	22	39	25	386	386	669
GN 113.3-25-130	25	25	130	130	30.8	28	22	22	39	25	386	386	707
GN 113.3-25-140	25	25	140	140	30.8	28	22	22	39	25	386	386	744
GN 113.3-25-150	25	25	150	150	30.8	28	22	22	39	25	386	386	784

Enquiry Now

To allow us to respond to your enquiry promptly, please provide all required information.