Products Range

 

Fixed Revolving and Fold-Away Handles

Fixed_3

GN 563.2

Handles

Assembly ;
Plain or tapped blind hole.
Features and applications
Handles GN 563.2 can be used as either operating handles or for clamping purposes, producing high clamping forces. Handles are produced using a stamping process which yields a high density material of high strength and a smooth surface.


Click here to view more information
Fixed_1

L.652

Handles

Colour ;
RAL 9005 black, RAL 2004 orange, RAL 3000 red, matte finish.
Material
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
Fixed_2

L.652 p

Handles

Assembly ;
Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ).
Colour
Black, matte finish.


Click here to view more information
Fixed_4

L.652-S

Safety adjustable handles with push action

Centre cap ;
Technopolymer, black colour. On request and for sufficient quantities, it can be supplied in yellow RAL 1021 (safety) or in other colours, with customised graphic symbols, marks or writings.
Colour
Black, matte finish.


Click here to view more information
Fixed_5

L.652-X

Adjustable handle

Centre cap:
Technopolymer, black colour.
Colour
Black, matte finish.


Click here to view more information
8330_L_652-S_p_p_i

L.652-S P

Safety adjustable handles with push action

Centre cap :
Technopolymer, black colour. On request and for sufficient quantities, it can be supplied in yellow RAL 1021 (safety) or in other colours, with customised graphic symbols, marks or writings.
Colour :
Black, matte finish.


Click here to view more information
8331_L_652-X_p_p_i

L.652-X P

Adjustable handle

Centre cap :
Technopolymer, black colour.
Colour :
Black, matte finish.


Click here to view more information
7438_I_622_p_i

I.622

Handles

Colour :
Six standard colours: black, orange, grey, yellow, light-blue, red. Glossy finish.
Material :
Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
7439_I_622_N_p_i

I.622 N

Handles

Assembly :

Plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).
Assembly instructions :

Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.

 


Click here to view more information
7440_I_622_N_CLEAN_p_i

I.622 N-CLEAN

Handles

Assembly :

Plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).
Assembly instructions :

Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.

 


Click here to view more information
7423_I_222_p_i

I.222

Handles

Alternative products :
I.622 handles, with higher performances and cheaper price are available for dimensions smaller or equal to 55 mm.
Dimensions 70 and 90 mm, are only available in this series (I.222), due to technical reasons.
Assembly :
Tapped blind hole.


Click here to view more information
7424_I_222_N_p_i

I.222 N

Handles

Alternative products :

I.622 handles, with higher performances and cheaper price are available for dimensions smaller or equal to 55 mm.
Dimensions 70 and 90 mm, are only available in this series (I.222), due to technical reasons.
Assembly :
Glass-fibre reinforced polyamide based (PA) technopolymer self-locking boss, plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).


Click here to view more information
8183_DIN_319_B_p_i

DIN 319

Ball knobs

Assembly :
– Version L: hole with tolerance ring in spring steel.
– Version M: with tapered hole.
Colour :
Black, glossy finish.


Click here to view more information
8072_GN_319_2_p_i

GN 319.2

Revolving ball knobs

Colour :
Black, glossy finish.
Features and applications :
Revolving ball knobs GN 319.2 can be utilized instead of revolving handles i.e. with handwheels.


Click here to view more information
7577_P_111_p_i

P.111

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7578_P_111+x_p_i

P.111+X

Revolving handles

Assembly :
Zinc-plated steel threaded shank, two flat faces for fitting with 12 mm spanner.
Colour :
Black, glossy finish.


Click here to view more information
7608_SH_N_p_i

SH.N

Ball knobs with magnifying lens

Accessories on request :
Self-adhesive labels MA. with standard marks and symbols to be ordered separately.
Assembly :
Glass-fibre reinforced polyamide based (PA) technopolymer self-locking boss, plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).


Click here to view more information
7446_IH_N_p_i

IH.N

Knobs with magnifying lens

Accessories on request :
Self-adhesive labels MA. with standard marks and symbols to be ordered separately.
Assembly :

Plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).

 


Click here to view more information
8643_IEL_N-H_SOFT_p_i

IEL.N-H SOFT

Two-volume handleswith magnifying lens

Accessories on request :
Self-adhesive labels MA. with standard marks and symbols to be ordered separately.
Assembly instructions :
1. Fit the handle, without the magnifying lens, onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.
2. Stick the self-adhesive label (printed on the adhesive side) to the inner surface of the magnifying lens by pressing from the centre to the external side to avoid air bubbles. Assemble the magnifying lens to the handle face recess by gently tapping with a wooden or plastic mallet, until firmly in place. The label is therefore protected by the watertight magnifying lens.


Click here to view more information
8641_IEL+x_SOFT_p_i

IEL+X SOFT

Two-volumerevolving handles

Colour :
Black, matte finish.
Features and applications :
Handles coated with “soft-touch” elastomer: it improves the grip even in the presence of oils, greases and sweat from the hand. Particularly suitable for applications on fitness machines, tools and machines for gardening and goods transport, high-precision instruments and disability aids.


Click here to view more information
8642_IEL_N_SOFT_p_i

IEL.N SOFT

Two-volume handles

Assembly instructions :
Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.
Colour :
Black, matte finish.


Click here to view more information
7812_EBK-SOFT_EBK_p-SOFT_p_i

EBK.SOFT

Two-volume handles

Colour :
Black, matte finish.
Features and applications :
Handles coated with “soft-touch” elastomer: it improves the grip even in the presence of oils, greases and sweat from the hand. Particularly suitable for applications on fitness machines, tools and machines for gardening and goods transport, high-precision instruments and disability aids.


Click here to view more information
7986_EBK-C_SOFT_p_i

EBK-C SOFT

Handles

Centre cap :
Polypropylene based (PP) technopolymer, in Ergostyle colours, matte finish, press-fit assembly.
Colour :
Black, matte finish.


Click here to view more information
7541_MA__p_i

MA.

Labels with marks and symbols

Assembly instructions :
Stick the self-adhesive label (printed on the adhesive side) to the inner surface of the magnifying lens by pressing from the centre to the external side to avoid air bubbles.
Material :
Self-adhesive vinyl film, suitable for sticking to the inner surface of the magnifying lens of all the following handles: SH.N, IH.N, IEL.N-H.


Click here to view more information
7969_EBK-H_SOFT_p_i

EBK-H SOFT

Handles with magnifying lens

Accessories on request :
Self-adhesive labels MA. with standard marks and symbols to be ordered separately.
Colour :
Black, matte finish.


Click here to view more information
7790_EBK+x_p_i

EBK+X

Two-volume revolving handle

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
7171_EBS+x_p_i

EBS+X

Two-volume revolving handle

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
8601_EBS+x_SOFT_p_i

EBS+X SOFT

Two-volume revolving handle

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
7180_EKK__p_i

EKK.

Knurled knobs

Assembly :
Brass boss, tapped blind hole.
Colour :
Available in Ergostyle colours, matte finish.


Click here to view more information
7181_EKK_p_p_i

EKK.P

Knurled knobs

Assembly :
Zinc-plated steel threaded stud, chamfered end according to UNI 947 : ISO 4753 (see Technical Data ).
Colour :
Grey-black, matte finish.


Click here to view more information
8039_GN_676_1_p_i

GN 676.1

Knobs

Assembly :
Tapped blind hole.
Ergonomy and design :
When used as a push-pull button, the thumb rests naturally on the concave front surface making it easier to grip the knob. The slight knurling of the rim (execution B) makes tightening or clamping operations easier.


Click here to view more information
7344_GN_676_5_p_i

GN 676.5

Knobs

Assembly :
Tapped blind hole.
Ergonomy and design :
When used as a push-pull button, the thumb rests naturally on the concave front surface improving the grip. The knurling on the rim of the knob (execution B) makes tightening or clamping operations easier.


Click here to view more information
7579_P_131_p_i

P.131

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7580_P_131p_p_i

P.131 P

Handles

Assembly :
Zinc-plated steel stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ).
Colour :
Black, glossy finish.


Click here to view more information
8117_GN_75_p_i

GN 75

Waist shaped knobs

Accessories on request :
Zinc-plated steel.

Features and applications :
Waist shaped knobs GN 75 boast a compact and timeless design.


Click here to view more information
9199_P_390_p_i

P.390

Handles

Assembly instructions :
Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle slightly with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.
Colour :
Black, glossy finish.


Click here to view more information
7581_P_390_N_p_i

P.390 N

Handles

Assembly :

Glass-fibre reinforced polyamide based (PA) technopolymer self-locking boss, plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).
Assembly instructions :

Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.

 


Click here to view more information
7432_I_307_p_i

I.307

Handles

Assembly :
Brass boss, tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7419_I_168_SOFT_p_i

I.168 SOFT

Knurled handle

Assembly :

Brass boss, plain blind hole.
Fitting to the shaft by means of a black-oxide steel socket set screw according to ISO 4029 (grub screws with hexagon socket and cup end).
Colour :
Black, matte finish.


Click here to view more information
7417_I_150_p_i

I.150

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7412_I_137_p_i

I.137

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7422_I_218_p_i

I.218

Handle

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7414_I_142_p_i

I.142

Handle

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7420_I_195_p_i

I.195

Handle

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7415_I_147_p_i

I.147

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7416_I_149_p_i

I.149

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7434_I_580_N_p_i

I.580 N

Handles

Assembly :

Blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).
Assembly instructions :

Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.

 


Click here to view more information
7176_EGH-SOFT_p_i

EGH.SOFT

Handle

Assembly :

Plain blind hole.
The elastic coupling by press-fit assembly on h9 tolerance drawn stock bars, is not affected by vibrations and prevents the handle from slipping off (see Technical Data ).
Assembly instructions :

Fit the handle onto slight chamfered shaft end and push as far as possible by hand or by means of a small press. Alternatively it is possible to tap the handle with a plastic or wooden mallet until firmly in place. In this case we strongly recommend to use a cloth or other suitable soft material over the product to avoid any surface damage.

 


Click here to view more information
7418_I_167_p_p_i

I.167 P

Handles

Colour :
Black, glossy finish.
Material :
Phenolic based (PF) Duroplast body, polyamide based (PA) technopolymer flange. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
8153_GN_310-NI_p_i

GN 310-NI

Lever arms

Arm :
AISI 303 stainless steel.
Features and applications :
AISI 303 stainless steel, thanks to its high resistance to corrosion, allows the application of these lever arms on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.


Click here to view more information
8602_I_680_SOFT_p_i

I.680 SOFT

Handles

Colour :
Black, matte finish.
Features and applications :
The coating, with “soft-touch” elastomer, improves the grip even in the presence of oils, greases and sweat from the hand. For this reason it is suitable for fitness machines, tools and machines for gardening and goods transport, high-precision instruments and disability aids.


Click here to view more information
9631_I_780_p_i

I.780

Handles

Assembly :
Threaded blind hole.
Colour :
Black or red, matte finish.


Click here to view more information
7426_I_280_p_i

I.280

Handles

Assembly :
Tapped blind hole.
Colour :
Black, glossy finish.


Click here to view more information
7428_I_281_p_i

I.281

Revolving handles

Assembly :
Plain through hole.
Colour :
Black, glossy finish.


Click here to view more information
7427_I_280_p_p_i

I.280 P

Handles

Assembly :
Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ).
Colour :
Black, glossy finish.


Click here to view more information
7429_I_281+x_p_i

I.281+X

Revolving handles

Assembly :
Matte chrome-plated steel shank, cylindrical-head with hexagon socket.
Colour :
Black, glossy finish.


Click here to view more information
9864_I.281+x-SST_p_i

I.281+X-SST

Revolving handles

Assembly :
AISI 304 stainless steel shank, cylindrical-head with hexagon socket.
Colour :
Black, glossy finish.


Click here to view more information
7430_I_281+x+Gh_p_i

I.281+X+GH

Revolving handles

Assembly :
Matte chrome-plated steel shank, cylindrical-head with hexagon socket.
Colour :
Black, glossy finish.


Click here to view more information
7433_I_481+x_p_i

I.481+X

Revolving handles

Applications :
This handle is an economical solution for the most common applications.
Assembly :

Black-oxide steel shoulder screw, cylindrical-head with hexagon socket.
A knurling acts as obstruction when the handle is fully screwed into its hole (the screw threaded end must be slightly chamfered).

 


Click here to view more information
7431_I_301+x_p_i

I.301+X

Revolving handles

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, glossy finish.


Click here to view more information
8617_I_301+x-SST_p_i

I.301+X-SST

Revolving handles

Colour :
Black, glossy finish.
Material :
Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
7435_I_601+x_p_i

I.601+X

Revolving handles

Assembly :
Zinc-plated steel threaded shank,  hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
7436_I_601+x__INOX_p_i

I.601+X-SST

Revolving handles

Assembly :
AISI 303 stainless steel shank, hexagonal socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
7299_GN_598_p_i

GN 598

Revolving handles

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
RAL 9005 black colour, matte finish, epoxy resin coating.


Click here to view more information
7789_I_631+x_p_i

I.631+X

Two-volume revolving handle

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
7437_I_621+x_p_i

I.621+X

Two-volume revolving handles

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information
9453_I_621+x-SST_p_i

I.621+X-SST

Two-volume revolving handles

Colour :
Black, matte finish.
Material :
Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
9660_I_621+x+Gx_p_i

I.621+GX

Revolving handles with shank for frontal screwing

Colour :
Black, matte finish.
Material :
Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
7371_GN_798_p_i

GN 798

Two-volume revolving handles

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Ergonomy and design :

The two-volume special design of this handle provides the operators hand with a safe and ergonomic grip.

 


Click here to view more information
7961_I_644_p_i

I.644

Revolving handle with antimicrobial protection

Applications :
I.644 handle is suitable for applications where hygienic and sanitary elements are required:
– medical and hospital equipment
– disability aids
– machines for food processing and pharmaceutical industry
– equipment for catering service
– urban and public fittings.
Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.


Click here to view more information
7136_DIN_39_p_i

DIN 39

Fixed handles

Assembly :
– Type D: with plain shaft.
– Type E: with threaded shaft.
Features and applications :
On the official DIN standard sheet you can find additional the sizes 10 and 13.


Click here to view more information
7163_DIN_98_p_i

DIN 98

Revolving handles

Assembly :
Type E: zinc-plated steel shank, hexagon socket at threaded end.
Type D: zinc-plated steel shank.
Material :
– Execution AL: fine turned aluminium.
– Execution ST: zinc-plated steel.
– Execution KT: polyamide based (PA) technopolymer, black colour, matte finish (only for D = 16, 20, 25, 32).


Click here to view more information
7441_I_701+x_p_i

I.701+X

Revolving handles

Assembly :
Zinc-plated steel shank, hexagon socket at threaded end.
Colour :
Black, matte finish.


Click here to view more information

I.731+X

Revolving handles

Colour :
Black, matte finish.
Ergonomy :
The grooves cut into the cylindrical surface allow the optimization of the grip with the tips of the fingers, due to the small size of the handle.


Click here to view more information
9713_I_741+x_p_i

I.741+X

Revolving handles

Colour :
Black, matte finish.
Ergonomy :
The grooves cut into the cylindrical surface allow
an effective and ergonomic grip, though necessarily limited to the fingertips, due to the small size of the handle.


Click here to view more information
7411_I_135_p_i

I.135

Revolving handles

Assembly :
Plain through hole with polyamide based (PA) technopolymer guide bosses in both ends.
Colour :
Black, glossy finish.


Click here to view more information
7609_SI_134_p_i

SI.134

Revolving handles

Assembly :
Plain through hole with polyamide based (PA) technopolymer guide bosses in both ends.
Colour :
Black, glossy finish with equatorial groove.


Click here to view more information
9464_EFH_620_p_i

EFH.620

Two-volume fold-awayhandles

Colour :
Black, matte finish.
Features and applications :
Handle pivots freely during operation: a system of coaxial bushings compensates return spring load.
This series of fold-away handles has been designed for all those applications for which, owing to lack of space or for safety reasons, the handle must be folded-away once the operation has been completed.


Click here to view more information
7453_IR_620_p_i

IR.620

Two-volume fold-awayhandles

Colour :
Black, matte finish.
Features and applications :
Handle pivots freely during operation.
This series of fold-away handles has been designed for all those applications for which, owing to lack of space or for safety reasons, the handle must be folded-away once the operation has been completed..


Click here to view more information
8101_GN_598_3_p_i

GN 598.3

Fold-away handles

Features and applications :
The handle is pulled out of its taper seating in the direction of the arrow and then tilted. A fold-away mechanism with compression spring locks the handle in both end positions.
GN 598.3 fold-away handles are suitable when the handle must be withdrawn during automatic operations for safety reasons or for lack of space.
Material :
Black phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
8102_GN_598_5_p_i

GN 598.5

Fold-away handles

Features and applications :
Handle pivots freely during operation: a system of coaxial bushes compensates return spring load. A fold-away mechanism with compression spring locks the handle in both end positions.
GN 598.5 fold-away handles are suitable when the handle must be withdrawn during automatic operations for safety reasons or for lack of space.
Stainless steel, thanks to its high resistance to corrosion, allows the application of these fold-away handles on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.
Material :
Black phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.


Click here to view more information
8121_GN_798_3_p_i

GN 798.3

Fold-away handles

Applications :
GN 798.3 fold-away handles are suitable when the handle must be withdrawn during automatic operations.
Colour :
Black, matte finish.


Click here to view more information
8122_GN_798_5_p_i

GN 798.5

Fold-away handles

Applications :
GN 798.5 fold-away handles are suitable when the handle must be withdrawn during automatic operations.
Stainless steel, thanks to its high resistance to corrosion, allows the application of these fold-away handles on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to use corrosion resistant materials.
Colour :
Black, matte finish.


Click here to view more information
8983_GN_798_7_p_i

GN 798.7

Safety fold-away handles

Colour :
Black, matte finish.
Ergonomy and design :
Typical in design is the stepped shape consisting of two cylinders giving the operator a better grip.


Click here to view more information
7455_IRS_802_INOX_p_i

IRS.802-SST

Safety fold-away handlesFold-O-matic

Colour :
Black, matte finish.
Double guide stud :
AISI 303 stainless steel. Handle pivots freely during operation: a system of coaxial bushings compensates return spring load.


Click here to view more information
8196_IRS_820_p_i

IRS.820

Two volume safety fold-awayhandles Fold-O-matic

Colour :
Black, matte finish.
Features and applications :
Handle pivots freely during operation: a system of coaxial bushings compensates return spring load.
The safety fold-away handle (ELESA patent) is provided with a special return mechanism “Fold-O-Matic”® which automatically folds the handle into the retracted position when the operation has been completed. A light pressure on the handle in the direction of the handwheel axes is enough to bring it in the operation position, allowing the operator to turn the handwheel freely.


Click here to view more information
9447_GN_798_2_p_i

GN 798.2

Revolving handles

Colour :
Black, matte finish.
Features and applications :
Typical in design are the revolving handles GN 798.2 with their stepped shape consisting of two cylinders giving the operator a better grip.


Click here to view more information
9497_GN_319_5_p_i

GN 319.5

Revolving ball knobs

Colour :
Black, glossy shiny finish.
Features and applications :
Revolving ball knobs GN 319.5 can be utilized instead of revolving handles i.e. with handwheels.


Click here to view more information
9499_DIN_39_p_i

DIN 39-A4

Fixed handles

Assembly :
Pin with hexagon socket threaded end (type E).
Features and applications :
On the official DIN standard sheet you can find additional the sizes 10 and 13.


Click here to view more information
9676_GN_75_5_p_i

GN 75.5

Waist shaped knobs

Information :
Waist shaped knobs GN 75.5 boast a compact and timeless design.
They are made of high-grade stainless steel which makes them the first choice when it comes to applications requiring high standards of hygiene. The favourably designed and non-scooped geomtery helps to prevent damp and the related risk of dirt collecting.
Material :
AISI 304 matte shot-blasted, stainless steel.
– Version MT: Stainless Steel (A4 quality).
– Version PL: highly polished.


Click here to view more information